12820 S. Memorial Dr., #126
Bixby, Oklahoma 74008

   
Tulsa Chain.com, LLC. is a certified small business.
Active in CCR & ORCA Certified
Cage Code Available upon request.

Buy Online Today
 

     Toll Free:
     866.392.2829

         Call or Order Online


Ordering Online
With Us Is
Safe And Secure!

Liability Insurance Certificate
Available Upon Request

website security

Number 1 rigging superstore


We gladly accept:

Research it, Ship it, Buy it


 
    

cartView Cart:
No. Items:
Subtotal: $0.00


we gladly except master card   we gladly except discover card   we gladly except visa card   we gladly except american express

PayPal
Free Shipping Some product exclusions apply.
See freight policy for more details.
ON ALL ORDERS OVER $499.00
No Shipping is charged if the order is over $499 and can be shipped via UPS ground small packaged. If the item has to be shipped via truck freight (ex. drum of chain) it must be to a commercial destination within the continental United States. There may be additional charges if we ship to a residential address. Orders under $499 will have exact shipping charged (UPS small package or Truck freight). If you have any questions at all please do not hesitate to give us a call. 866-392-2829

Are you looking for a specific brand?  Or special assembly? Call
 866.392.2829

#1 Online Store for Chain, Wire Rope, Slings, All Rigging Gear, Fittings and more!




Click below to explore
our full product lines.

  Aircraft Cable & Accessories
  Bearing Swivels
  Below The Hook Lifters
  Binder Chain (All Grades)
  Blocks - JOHNSON
  Chain & Wire Rope Hardware
  Clamps and Trolleys
  Clearance
  Davit Cranes
  Electric Chain Hoist
  Eye Bolts - Eye Nuts
  Fork Truck Accessories
  Gantry Cranes
  Grade 100 Chain
  Grade 100 Chain Slings
  Grade 100 Fittings
  Grade 100 Fittings (Winner)
  Grade 120 Chain
  Grade 120 Chain Slings
  Grade 120 Fittings
  Grade 30 Chain
  Grade 43 Chain
  Grade 70 Chain
  Grade 70 Fittings
  Grade 70 Wrecker & V Chains
  Grade 80 Chain
  Grade 80 Chain Slings
  Grade 80 Fittings
  Grade 80 Fittings - Expanded Line
  Hoist's- Overload Protec.
  Lifting Hooks
  Lifting/Spreader Beams
  Magnets - Lifting
  Marine Chain
  Material Stands
  Material/Personnel Baskets
  Pneumatic Chain Hoist
  Powder Coated Chain & Acc.
  Ratchet & Lever Binders
  Ratchet - Tiedown Straps
  Recovery Tow Strap
  Renfroe® Lifting Clamps
  RUD® Lifting & Lashing Points
  Security Chain
  Shackles
  Snatch Blocks
  Stainless Shackles & Turnbuckles
  Stainless Steel Chain
  Stainless Steel Hooks & Rigging
  Stainless Steel Marine Hardware
  SuperClamp
  Synthetic Lifting Slings
  Synthetic Ropes & Twines
  Terrier Lifting Clamps
  Tire Chains
  Tow & Transit Accessories
  Truckers Chain
  Turnbuckles
  Weldless & General Use Chain
  Winches
  Wire Rope Slings


overstock_sale
click here for clearance

Grade 120 Chain

Grade 120 binder chain Tulsa Chain

Grade 100 cut chain availabe

We want to earn your business,
we'll earn your trust.

Best Price Guarantee
Don’t let price stand in your way!
We will meet or beat anybody’s delivered price!!

Call and speak to one of our rigging professionals today.
Toll Free: 866-392-2829

TERMS & CONDITIONS

Updated: Friday, January 30, 2015

grade 120 chain
Grade 120 Chain
WINNER PRO
GRADE 120 Chain
FEATURES AND BENEFITS:
  • Higher Wear Resistance
    Due to the special form of the profile chain, a larger contact is achieved between the bearing surfaces of the links (see diagram). This, in turn, reduces the surface pressure on the chain and consequently reduces wear substantially. This is a real advantage in abrasive environments.
  • Bending Resistance
    The new profile of the G120 chain has up to 38% higher moment of resistance compared to regular round-link chains with the same diameter. Therefore, chain can withstand bending forces better than round-link chains and is well equipped for heavy applications.
  • Higher Design Factor
    With same dimension of chain and workload, G120 offers a design factor of 6:1 compared to G80 with 4:1.
  • Color-Coded Corrosion Protection
    G120 has a powder coated finish in blue, which provides easy identification and corrosion protection.
  • G120 meets or exceeds the G100 NACM/ASTM-test requirements for lifting chains
    Exceeds the 4:1 NACM design factor if G80 loading is used meets the NACM standard for heat resistance with 400° F meets the 20,000 cycle ASTM-Standard fatigue test for Grade 100

Technical Data:
Hardness approx. 41 HRC                                    Heat resistance up to 400° F
Nominal proof stress* 600N/mm2                      Components fatigue tested to 20,000 cycles
Nominal breaking stress* 1200 N/mm2            Surface powder coated blue
Elongation min. 20%                                              *calculated acc. usual definition for round steel chain

ORDER BELOW
Design Factor
1-Leg Sling
2-Leg Sling
3-Leg & 4-Leg Slings
4:1
Grade 120 1 Leg sling
grade 120 2 leg sling
3 - leg slings grade 120
Angle
90 Degrees
60 Degrees
45 Degrees
30 Degrees
60 Degrees
45 Degrees
30 Degrees
Code
Dim
W.L.L.
NI 720
9/32"
5200
9000
7400
5200
13500
11000
7800
NI 820
5/16"
6600
9300
11400
6600
17100
14000
9900
NI 1020
3/8"
10600
18400
15000
10600
27500
22500
15900
NI 1320
1/2"
17900
31000
25300
17900
46500
38000
26900
Grade 120 Chain Fittings
Don't Forget Your Chain Fittings!

Complimentary Products

About Grade 120 Chain

Grade 120 chain was specifically designed to for extreme overhead lifting applications. Grade 120 Chain is an ultra-premium quality high strength alloy steel. Grade 120 Chain has a 50 percent increase in working load limit as compared to a similar size chain in Grade 80. This allows you to reduce the size of the chain depending on the working load needed. Grade 120 chains are also referred to as Grade 12, Grade 120 Winner Pro. Grade 120 Chain IS approved for overhead lifting. READ MORE...

All of our Pewag Grade 120 Chain is Made in the Europe. To help identify the grade and manufacturer all of our Grade 120 Chain is embossed with”120” and D16. The D16 is the chain manufacturer Pewag. The 120 identifies this as a Grade 120 Chain. Grade120 chain is typically finished with a Blue Powder Coat.. This is a tough durable finish. Grade 120 chain is a “square” link design.
Intelligent profile -
because of the intelligent use of material, the major characteristics of the chain (i.e. fatigue resistance and bending resistance) were improved in a remarkable way, when you compare the same cross section of the profile chain versus the round steel chain. In order to reach the best mechanical performance, the material use was optimized on effective areas (blue area) and reduced on less relevant areas (red area).

Optimized bending resistance: The section modulus which is important for preventing undesirable bending deformation is up to 16% higher with the profile chain compared to round steel chain with
the same cross section. Therefore the max stress in the chain is reduced (no red areas). 50% higher load capacity compared To Grade 80, 20% higher load capacity compared to G100.

Pewag Grade 120 chain is 100% European made produced from the highest quality alloy steel available. The chain is tested throughout the manufacturing process. All of our Grade 120 chain is Proof Tested to twice the working load limit. The minimum break strength is four times the working load limit. Our Pewag  Grade 120 Alloy Chain meets or exceeds all existing OSHA, Government and ASTM specification requirements.

All of our Grade 120 Chain is 100 percent Proof Tested. Certs available free of charge.

Please request at the time of order placement.

Terms

Grade of Chain: NACM (National Association of Chain Manufacturers & ASTM (American Society for Test Materials) classify chains in various grades. The higher the grade, the higher the working load limit for the same size of chain. READ MORE...

Working Load Limit (WLL): (rated capacity) Is the maximum working load that should be applied In direct tension to an undamaged straight length of chain.

Proof Test: (manufacturing test force) Is a term designating the minimum tensile force which has been applied to a chain under a constantly increasing force In direct tension during the manufacturing process. These loads are manufacturing integrity tests and shall not be used as criteria for service or design purpose.

Minimum Breaking Force: The minimum force at which the chain during manufacture has been found by testing to break when a constantly increasing force is applied in direct tension. Breaking force values are not guarantees that all chain segments will endure these loads. This test is a manufacturer's attribute acceptance test and SHALL NOT be used as criteria for service and design purpose.

Overhead Lifting: The process of lifting that would elevate a freely suspended load to such a position that dropping a load would present a possibility of bodily injury or Property damage.


Categories | Grade 120 Chain  
Displaying 1 through 2 of 2 products.
 
Pewag - Austria  Grade 120 Chain Full Drum  
Product Code: 1 
Grade 120 chain full drum
grade 120                                                                             ORDER BELOW
Part
Number 
Code
Working Load
Limit (Lbs.)
Chain
Size
Nominal
Thickness
(d)
Pitch
(t) 
Width
Inside min. (b1)
Width
Inside max (b2)
Break
Load (Lbs.)
Weight
Per Ft. (Lbs.) 
Full
Drum Length 
Price
Per Ft. 
Price Per
Full Drum
64620
NI 720
5,200
9/32" (7mm)
0.276
0.866
0.393
1.024
20,800
0.874
800 Feet
$5.25
$4,200.00
88715
NI 820
6,600
5/16" (8mm)
0.315
0.984
0.433
1.142
26,400
1.040
500 feet
$5.78
$2,890.00
64621
NI 1020
10,600
3/8" (10mm)
0.394
1.3
0.559
1.457
42,400
1.747
400 Feet
$7.05
$2,820.00
64622
NI 1320
17,900
1/2" (13mm)
0.512
1.614
0.732
1.949
71,600
3.091
200 Feet
$14.25
$2,850.00
 

  
Price: Based on Selection
Status: In-Stock 
Qty 


 
 
Pewag - Austria  Grade 120 Chain per Foot  
Grade 120 chain custom cut
NOW YOU CAN ORDER GRADE 120 CHAIN - PER FOOT!
  grade 120 chain order per foot                                                                                                                                                ORDER BELOW
Part
Number 
Code
Working Load
Limit (Lbs.)
Chain
Size
Nominal
Thickness
(d)
Pitch
(t) 
Width
Inside min. (b1)
Width
Inside max (b2)
Break
Load (Lbs.)
Weight
Per Ft. (Lbs.) 
Price
Per Ft.
64620
NI 720
5,200
9/32" (7mm)
0.276
0.866
0.393
1.024
20,800
0.874
$5.94
88715
NI 820
6,600
5/16" (8mm)
0.315
0.984
0.433
1.142
26,400
1.040
$6.75
64621
NI 1020
10,600
3/8" (10mm)
0.394
1.3
0.559
1.457
42,400
1.747
$7.89
64622
NI 1320
17,900
1/2" (13mm)
0.512
1.614
0.732
1.949
71,600
3.091
$15.85
 

  
Price: Based on Selection
Status: In-Stock 
Qty  Feet


 
Displaying 1 through 2 of 2 products.

 

 

 

 



Tulsa Chain

12820 South Memorial Drive, # 126 • Bixby, Oklahoma   74008
866.392.2829 • 918.392.2829 • 918.392.2833 fax
 

Copyright© 2009 - 2015 Tulsa Chain.com, LLC.
All Rights Reserved
Last Updated: Monday, November 16, 2015
Website Built and Maintained
By:
D-Zine Web Development