Grade 100 Weld-on Lifting Ring - Double Base

Stamperia

Cartec Fittings are manufactured by Stamperia Carcano Giuseppe, spa in Italy.
They have been producing first class forgings since 1960.
All the Cartec forgings are approved by the German standards company BG Holz und Metall.
This can be identified with the quality mark "H92" on every piece.
This ISO 9001-2008 plant ensures complete material traceability on each product.

Lifting Ring, Weld On Type Double Base
Position Made Easier for Lifting
USE

Ring to be welded for load lifting.
The entire perimeter of the base must be welded except for the water discharge area
For asymmetric loads remember that the capacity has to be reduced as shown in the reference table
The bracket must always be aligned to the polling direction (tolerance allowed +/- 10°)
The anchorage clamp can be used safely up to maximum of 20.000 lifts with a full load
Safety coefficient 4
Ring tested 100% magnaflux
Made in high resistant steel
Painted with epoxy paint
Tested at 20.000 stress cycles

Double Base Weld-on Lifting Ring Specifications

Part Number	WLL (tons)	A (in.)	B (in.)	C (in.)	D (in.)	E (in.)	F (in.)	G (in.)	H (in.)	Weight (lbs)
C820X04	4	0.55	2.56	1.89	1.14	5.28	0.55	2.36	3.11	1.61
C820X067	6.7	0.79	3.27	2.36	1.54	6.65	0.63	3.46	4.06	3.97
C820X10	10	0.87	3.78	2.56	1.89	7.72	0.77	3.86	4.65	6.61
C820X16	16	1.22	4.96	3.54	2.17	10.39	1.14	5.00	6.10	12.68
C820X30	30	1.65	6.89	5.12	3.11	14.61	1.77	6.18	8.54	35.27

Part Number	Description	Brand	Weight	Price	Quantity
C820X04	4 ton Grade 100 Weld-on Lifting Ring - Double Base	Cartec	1.61 lbs	$68.17	+ -
C820X067	6.7 ton Grade 100 Weld-on Lifting Ring - Double Base	Cartec	3.97 lbs	$124.22	+ -
C820X10	10 ton Grade 100 Weld-on Lifting Ring - Double Base	Cartec	6.61 lbs	$202.25	+ -
C820X16	16 ton Grade 100 Weld-on Lifting Ring - Double Base	Cartec	12.67 lbs	$387.78	+ -
C820X30	30 ton Grade 100 Weld-on Lifting Ring - Double Base	Cartec	35.26 lbs	$978.31	+ -

Grade 100 Weld-on Lifting Ring - Double Base

Tulsa Chain.com, LLC