Eye Bolt Fine Thread Plain and Shoulder

Drop forged steel. Heat treated after forging.
Available In: Self-colored, zinc plated, or hot galvanized.
Plain or shoulder type, blank or threaded.
Vertical loads are based on a safety factor of 5 to 1.
Variation in quantity: on special items we reserve the right to
a maximum 10% variation for allowances in manufacture.

Working load limits for eye bolts are based on a straight vertical lift in a gradually increasing manner.
Angular lifts will significantly lower working load limits (see Shoulder Pattern) and should be avoided
whenever possible. If an angular lift is required, a properly seated Shoulder Pattern eye bolt must be
used. Loads should always be applied to eye bolts in the plane of the eye, not at an angle to this plane.
Angular lifts must never be more than a 45° pull.

Diameter and Thread	Working Load Limit
Diameter and Thread	Straight Pull (X)	45° Pull (Y) Shoulder Only
1/4"-20	500	125
5/16"-18	900	225
3/8"-16	1400	350
7/16"-14	2000	500
1/2"-13	2600	650
9/16"-12	3200	750
5/8"-11	4000	1000
3/4"-10	6000	1500
7/8"-9	7000	1750
1"-8	9000	2250
1-1/8"-7	12000	2500
1-1/4"-7	15000	3750
1-1/2"-6	21000	4900

WARNING!

ANGULAR LIFTS SHOULD BE AVOIDED WHENEVER POSSIBLE.

Shank Diameter & Thread UNF 2-A	WLL lbs	Dimensions (inches)			Part Number Plain Pattern	Weight Plain Pattern	Part Number Shoulder Pattern	Weight Shoulder Pattern
Shank Diameter & Thread UNF 2-A	WLL lbs	B Shank Length	C Eye I.D.	D Eye O.D.	Part Number Plain Pattern	Weight Plain Pattern	Part Number Shoulder Pattern	Weight Shoulder Pattern
1/4"-28	500	1"	3/4"	1-3/16"	K2001-UNF	0.06	K2021-UNF	0.06
5/16"-24	900	1-1/8"	7/8"	1-7/16"	K2002-UNF	0.11	K2022-UNF	0.11
3/8"-24	1,300	1-1/4"	1"	1-21/32"	K2003-UNF	0.18	K2023-UNF	0.18
7/16"-20	1,800	1-3/8"	1-3/32"	1-27/32"	K2004-UNF	0.23	K2024-UNF	0.23
1/2"-20	2,400	1-1/2"	1-3/16"	2-1/16"	K2005-UNF	0.35	K2025-UNF	0.35
9/16"-18	3,000	1-5/8"	1-9/32"	2-9/32"	-	-	K2026-UNF	0.47
5/8"-18	4,000	1-3/4"	1-3/8"	2-1/2"	K2007-UNF	0.7	K2027-UNF	0.7
3/4"-16	5,000	2"	1-1/2"	2-13/16"	K2008-UNF	1.1	K2028-UNF	1.1
7/8"--14	7,000	2-1/4"	1-11/16"	3-1/4"	K2009-UNF	1.7	K2029-UNF	1.7
1"-12	9,000	2-1/2"	1-13/16"	3-9/16"	K2010-UNF	2.36	K2030-UNF	2.36
1"-14	9,000	2-1/2"	1-13/16"	3-9/16"	-	-	K2031-UNF	2.36
1-1/4"-12	15,000	3"	2-3/16"	4-7/16"	-	-	K2032-UNF	4.68

Part Number	Description	Brand	Weight	Price	Quantity
K2001-UNF	1/4"-28 x 1" Eye Bolt Fine Thread Plain Pattern	Ken Forging	0.06 lbs	$5.18	+ -
K2002-UNF	5/16"-24 x 1-1/8" Eye Bolt Fine Thread Plain Pattern	Ken Forging	0.11 lbs	$5.58	+ -
K2003-UNF	3/8"-24 x 1-1/4" Eye Bolt Fine Thread Plain Pattern	Ken Forging	0.18 lbs	$5.65	+ -
K2004-UNF	7/16"-20 x 1-3/8" Eye Bolt Fine Thread Plain Pattern	Ken Forging	0.23 lbs	$6.67	+ -
K2005-UNF	1/2"-20 x 1-1/2" Eye Bolt Fine Thread Plain Pattern	Ken Forging	0.35 lbs	$6.07	+ -
K2007-UNF	5/8"-18 x 1-3/4" Eye Bolt Fine Thread Plain Pattern	Ken Forging	0.7 lbs	$9.61	+ -
K2008-UNF	3/4"-16 x 2" Eye Bolt Fine Thread Plain Pattern	Ken Forging	1.1 lbs	$11.30	+ -
K2009-UNF	7/8"-14 x 2-1/4" Eye Bolt Fine Thread Plain Pattern	Ken Forging	1.7 lbs	$15.75	+ -
K2010-UNF	1"-12 x 2-1/2" Eye Bolt Fine Thread Plain Pattern	Ken Forging	2.36 lbs	$19.05	+ -
K2021-UNF	1/4"-28 x 1" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.06 lbs	$5.18	+ -
K2022-UNF	5/16"-24 x 1-1/8" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.11 lbs	$5.58	+ -
K2023-UNF	3/8"-24 x 1-1/4" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.18 lbs	$5.65	+ -
K2024-UNF	7/16"-20 x 1-3/8" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.23 lbs	$6.67	+ -
K2025-UNF	1/2"-20 x 1-1/2" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.35 lbs	$6.07	+ -
K2026-UNF	9/16"-18 x 1-5/8" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.47 lbs	$11.13	+ -
K2027-UNF	5/8"-18 x 1-3/4" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	0.7 lbs	$9.61	+ -
K2028-UNF	3/4"-16 x 2" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	1.1 lbs	$11.30	+ -
K2029-UNF	7/8"-14 x 2-1/4" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	1.7 lbs	$15.75	+ -
K2030-UNF	1"-12 x 2-1/2" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	2.36 lbs	$19.05	+ -
K2032-UNF	1-1/4"-12 x 3" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	4.68 lbs	$37.51	+ -
K2030-UNS	1"-14 x 2-1/2" Eye Bolt Fine Thread Shoulder Pattern	Ken Forging	2.36 lbs	$19.05	+ -

Eye Bolt Fine Thread Plain and Shoulder

Tulsa Chain.com, LLC