Large Frame Beam Clamps

Manufactured to exceed all ASME B30.20 and OSHA regulations.
Painted safety yellow for increased visibility.
Do not side load above angles of 45° from vertical.
Durable construction ideally suited to jobsite or warehouse use.
Made in U.S.A.
Custom designs available - call for engineering.
ALL lifting equipment individually proof loaded
per OSHA requirements.
Refer to side loading table below for reduction factors for side loading applications.
Clamps to be used for lifting, pulling or as an anchor point.
Ratings apply to clamps only. User is responsible for engineering calculations
for all support steelwork.
WARNING: All clamps must be correctly applied to the beam by a competent
person and fully hand tightened.

Reduction in Working Load Limits when side loads are applied
Angle from Vertical	0°	0 - 15°	15 - 30°	30 - 45°
Reduction Factor	none	20%	35%	50%

Working
Load Limit
in lbs.

Part Number

Maximum
Flange
Thickness

Maximum
Flange
Width

Minimum
Flange
Width

Maximum
Slip Over
Width

Weight

15,680

13659

16.02

20.92

4.72

1.00

10.88

1.25

12.94

3.00

1.75

1.25

13.75

4.50

13.38

34.1

22,400

13674

16.02

20.92

4.72

1.25

10.88

1.50

12.94

3.75

2.50

1.25

13.75

4.50

13.38

43.1

*Call for specifications on larger sizes and capacities. † Indicates beam clamp for use on wide flange beams.

Part Number	Description	Brand	Weight	Price	Quantity
13659	Large Frame Beam Clamp WLL 15,680 lbs.	M&W	34.1 lbs	$995.26	+ -
13674	Large Frame Beam Clamp WLL 22,400 lbs.	M&W	43.1 lbs	$1212.97	+ -