Screw Pin Anchor Shackle Eyed Pin No. 263

Skookum

Skookum Gold Standard Forgings
All sizes are forged, quenched and tempered
Standard Painted Finish (zinc plate or galvanized finish) are available upon request
Custom sized & materials (stainless steel, etc..) are available upon request
Superior strength, hardness & uniformity
Size & working load permanently imprinted
Material heat codes imprinted on bale and pin
Short Tons - Design factor is 5 to 1
Specifications subject to change without notice

Skookum All Alloy Anchor Shackles

Made in the USA!

Part Number	WLL (tons)	Size	DIMENSIONS								Weight
Part Number	WLL (tons)	Size	D	W	(W) Tolerance +	L	(L) Tolerance +	B	R	P	Weight
626304	5	1/2"	0.63	0.41	0.63	1.88	0.13	1.28	1.44	0.63	1.00
626305	7	5/8"	0.75	1.06	0.63	2.50	0.13	1.75	1.63	0.75	2.00
626306	9	3/4"	0.88	1.25	0.63	2.88	0.25	2.00	1.84	0.88	3.00
626307	12	7/8"	1.00	1.44	0.63	3.31	0.25	2.28	2.13	1.00	4.00
626308	16	1"	1.13	1.69	0.63	3.75	0.25	2.69	2.25	1.13	5.50
626309	18	1-1/8"	1.13	1.81	0.63	4.25	0.25	2.94	2.63	1.25	8.00
626310	21	1-1/4"	1.25	2.03	0.63	4.63	0.25	3.25	3.00	1.38	11.00
626311	26	1-3/8"	1.38	2.25	0.13	5.25	0.25	3.63	3.25	1.50	14.00
626312	31	1-1/2"	1.50	2.38	0.13	5.75	0.25	3.88	3.44	1.63	18.00
626313	35	1-5/8"	1.63	2.63	0.13	6.25	0.25	4.63	4.00	1.75	23.00
626314	41	1-3/4"	1.75	2.88	0.13	7.00	0.25	5.00	4.25	2.00	30.00
626316	52	2"	2.00	3.25	0.13	7.75	0.50	5.75	5.00	2.25	42.00
626318	67	2-1/4"	2.25	3.88	0.13	9.25	0.50	6.50	5.50	2.50	57.00
626320	82	2-1/2"	2.50	4.13	0.13	10.50	0.50	7.25	5.88	2.75	85.00
626322	104	2-3/4"	2.75	4.50	0.13	11.50	0.75	7.50	6.25	3.00	100.00
626324	117	3"	3.00	5.00	0.13	13.00	0.75	7.88	6.50	3.25	136.00