Safety Pin Anchor Shackle No. 320

Price: Based on Selection Status: Call To Order - Toll Free 866.392.2829

Skookum

Skookum Gold Standard Forgings
All sizes are forged, quenched and tempered
Standard Painted Finish (zinc plate or galvanized finish) are available upon request
Custom sized & materials (stainless steel, etc..) are available upon request
Superior strength, hardness & uniformity
Size & working load permanently imprinted
Material heat codes imprinted on bale and pin
Short Tons - Design factor is 5 to 1
Specifications subject to change without notice

Skookum All Alloy Anchor Shackles

Made in the USA!

Part Number	WLL (tons)	Size	DIMENSIONS								Weight
Part Number	WLL (tons)	Size	D	W	(W) Tolerance +	L	(L) Tolerance +	B	R	P	Weight
632004	5	1/2"	0.63	0.41	0.63	1.88	0.13	1.28	1.44	0.63	1.00
632005	7	5/8"	0.75	1.06	0.63	2.50	0.13	1.75	1.63	0.75	2.00
632006	9	3/4"	0.88	1.25	0.63	2.88	0.25	2.00	1.84	0.88	3.00
632007	12	7/8"	1.00	1.44	0.63	3.31	0.25	2.28	2.13	1.00	4.00
632008	16	1"	1.13	1.69	0.63	3.75	0.25	2.69	2.25	1.13	5.50
632009	18	1-1/8"	1.13	1.81	0.63	4.25	0.25	2.94	2.63	1.25	8.00
632010	21	1-1/4"	1.25	2.03	0.63	4.63	0.25	3.25	3.00	1.38	11.00
632011	26	1-3/8"	1.38	2.25	0.13	5.25	0.25	3.63	3.25	1.50	14.00
632012	31	1-1/2"	1.50	2.38	0.13	5.75	0.25	3.88	3.44	1.63	18.00
632013	35	1-5/8"	1.63	2.63	0.13	6.25	0.25	4.63	4.00	1.75	23.00
632014	41	1-3/4"	1.75	2.88	0.13	7.00	0.25	5.00	4.25	2.00	30.00
632016	52	2"	2.00	3.25	0.13	7.75	0.50	5.75	5.00	2.25	42.00
632018	67	2-1/4"	2.25	3.88	0.13	9.25	0.50	6.50	5.50	2.50	57.00
632020	82	2-1/2"	2.50	4.13	0.13	10.50	0.50	7.25	5.88	2.75	85.00
632022	104	2-3/4"	2.75	4.50	0.13	11.50	0.75	7.50	6.25	3.00	100.00
632024	117	3"	3.00	5.00	0.13	13.00	0.75	7.88	6.50	3.25	136.00
632028	150	3-1/2"	3.50	5.75	0.25	15.00	0.75	9.50	8.00	3.75	256.00
632032	175	4"	4.00	6.50	0.25	17.00	0.75	11.00	9.00	4.25	364.00
632036	210	4-1/2"	4.50	7.25	0.25	19.00	1.13	12.50	9.75	5.00	500.00