VLBG Load Ring

    Also available in STAINLESS- See below

• VLBG Load Ring will turn 360°, adjustable in pull direction.
• Load ring foldable, full WLL in any load direction,
          surface pink powder coated.
• RUD Universal bolts and nuts for VLBG - 100% crack detected - !
• The hex-head-bolt is suitable for internal and external
          wrench mounting for types with metric threads.
• Surface protection: CORRUD - DT - at least 20 times better corrosion
          protection than zinc plating (except for the spot face) after length shortening.
• Thread over whole bolting length "H".
• Bolt is held captive in the body. Replace only with the same quality class bolt.
• Clear identification at the bolt head: RUD, thread size, quality class.
• The load ring must be installed perpendicular to the work piece.
          The work piece must be flat, providing complete contact for the load ring bushing.
• Load ring has to be adjusted in pull direction, free to move,
          and must not support on edges.
• Use acc. to user instructions and by trained persons.
• The lifting attachment must be free to move when attached to the load ring!
• Regular inspections should be carried out by a competent person.
• Load should not be turned during lifting.
• Ring must not touch the work piece!